High Precision Thin Wall Ball Bearing High Quality Thin Section Ball Bearing

• Customization: Available
• Contact Angle: C=0.4
• Aligning: Non-Aligning Bearing
• Model NO.: CSI01018
• Separated: Separated
• Rows Number: Single
• Load Direction: Radial Bearing
• Material: Bearing Steel
• Inner Diameter: 25.4mm
• Outer Diameter: 34.925mm
• Inner Diameter 2: 28.96mm
• Outer Diameter 2: 31.37
• Cr: 2.5kn
• Cor: 1.3kn
• Weight: 0.01kg
• Trademark: STMPB
• Origin: Luoyang, Henan, China
• HS Code: 8482102000
• Production Capacity: 1, 000, 000 Pieces/Year

Product Description

Company Profile

STMPB INDUSTRY was established in 2021; We have two bearing brand which STMPB INDUSTRY and YUPO were founded in 2021.STMPB INDUSTRY is our international brand which mainly faces overseas market.YUPO is the domestic brand which manily faces China market.

STMPB INDUSTRY bearing headquarters is mainly located in Zhengzhou, Henan Province, and the main production base is located in Luoyang, Henan Province. The main products of STMPB INDUSTRY bearings are high precision bearings and customized bearings. The main products of STMPB INDUSTRY are precision angular contact ball bearings, ball screw bearings and bearing units, thin-wall equal-section bearings, precision cylindrical roller bearings, YRT bearings, precision cross roller bearings, precision slewing bearings and non-standard customized products.

STMPB INDUSTRY bearing R & D team mainly composed of professors and doctors, the R & D strength is very strong, to provide customers with the best quality production solutions and solutions. STMPB INDUSTRY bearing with precision production equipment, can provide customers with stable P4,P3,P2 grade products.

STMPB INDUSTRY bearings are mainly applied in CNC machine tools, robots, medical machinery, precision instruments, petrochemical and other fields. So far, STMPB INDUSTRY bearings customers throughout South America, Southeast Asia, the Middle East, Europe and other regions, by the world's customers consistently high praise.

 

Product Parameters

 

Bearing designations	Boundary dimensions								Load rating		Weight
	d		D		d2		D2		Cr	Cor
	in.	mm	in.	mm	in.	mm	in.	mm	KN		kg
CSI01018	1	25.4	1.375	34.925	1.14	28.96	1.235	31.37	2.5	1.3	0.01
CSI01518	1.5	38.1	1.875	47.625	1.64	41.66	1.735	44.07	2.8	1.8	0.02
CSI01718	1.75	44.45	2.125	53.975	1.89	48.01	1.985	50.42	2.9	2.0	0.02

  

Detailed Photos

 

Installation Instructions

(1)Inspection of components before installation

Clean the bearing housing or other mounting parts, remove the dirt, and confirm whether the burrs of each

part have been removed.
 

(2) Install it on the bearing seat or shaft

Because it is a thin-walled bearing, it is easy to tilt during installation. Please use a plastic hammer to find the

level and tap it evenly in the circumferential direction, and install it little by little.

Until you can confirm the contact surface is fully seated by sound.
 

(3) Installation method of side compression flange
 

1.  After placing the side compression flange in position,

place it in the circumferential direction.

Shake back a few times to adjust the position of the

mounting bolts.

2.  Install the compression bolt, and make sure that

there is no deviation due to the bolt hole when tightening the

bolt by hand.

The distance causes the bolts to be difficult to screw in.

3.  The tightening of the compression bolt can be

divided into 3-4 parts from temporary tightening to final

tightening stage, repeat the tightening in the order on the

diagonal. When tightening is divided into two parts

When tightening the inner or outer ring press bolts, the

integral outer ring is often tightened during the tightening

process.

Or the inner ring can be adjusted and rotated a little to make the outer ring divided into two parts or the

deviation of the inner ring is corrected.
 

Special design: If you need special structure (such as outer ring with mounting holes, inner ring without

holes, etc.), non-standard size, special materials or high precision requirements, etc., please contact.
 

 

Certifications

 

Technological Support

28 professional mechanical engineers
16 professional bearing analysis engineers
326 professional workers
83 sets of high precision CNC machine tools
32 sets of bearing testing equipment
13,000 square meters factory

After Sales Service

 

In the sales process, we will have professional sales personnel to answer customers' questions in time, update the production progress, sort out the photos and videos of packaging and delivery, provide customers with the required documents; We will also invite customers to visit our factory, and we will strive to provide solutions for customers' needs.

It is not the end after delivery, but a new beginning. We will update the logistics status and arrival date to customers in time.Ask customers for feedback on product quality, packaging, etc. at the first time, so as to improve the next cooperation. We will do our best to deal with any customer's problems with the product.