Best Wet Pan Mill for Small-Scale Gold Mining and Mineral Grinding

• Customization: Available
• Type: Grinding Gold Machine
• Motor Type: AC Motor
• Model NO.: 1500*350
• Motor Power: 22kw
• Application: Construction, Water Conservancy, Railways, Industr
• Materials: Gold, Silver, Lead and Zinc, and Iron Ore, Molybde
• Outlet Size: 0.15-0.18mm
• Inlet Size: <=30mm
• Condition: New
• Warranty: 1 Year
• After-sales Service: One Year Quality Guarantee
• Name: Gold Grinding Machine
• Actual Case Areas: Russia, Kazakhstan, Egypt, Mexico, Mongolia, etc.
• Transport Package: Export Standard
• Specification: Please see the details
• Trademark: STM Centbro
• Origin: Zhengzhou, China
• HS Code: 8474100000
• Production Capacity: 50 Sets Per Month
• Package Size: 280.00cm * 280.00cm * 230.00cm
• Package Gross Weight: 10000.000kg

Product Description

Product Description

 

The three-roller wet mill is the core equipment for mineral crushing and mixing in mining machinery. It is mainly composed of a grinding wheel, a grinding plate, a motor, a reducer and a frame. The rotation of the grinding wheel applies extrusion, kneading and grinding to the material. It is widely used in grinding operations such as gold, silver, lead and zinc, and iron ore, molybdenum ore, etc.

 

Product advantages
1. Efficient crushing and mixing: The three-roller design combines revolution and rotation to achieve uniform material crushing and slurry mixing. The finished product fineness can reach 80-200 mesh, and the monomer separation effect is significant, especially suitable for precious metal extraction.
2. Low investment and maintenance costs: Compared with the ball mill, it has a simple structure, small size, convenient installation and 30%-50% lower initial investment; it adopts a modular design, and no large lifting equipment is required when replacing wearing parts (such as manganese steel liner), and the maintenance cost is low.
3. Energy saving and wide adaptability: It supports both dry and wet use, can process feed below 25mm, and is suitable for various types of ores; the energy consumption of electric drive is 15%-20% lower than that of traditional equipment, and the tailings recovery rate is higher.
4. Durability and stability: The grinding wheel and grinding plate are cast with special wear-resistant alloy steel, and the service life is extended by 2-3 times; the reducer and bearing design are optimized (such as Wafangdian bearings, all-copper core motors), and the operation is stable and low noise.
5. Small and medium-sized applicability: The daily processing capacity of a single machine can reach 15-30 tons, which can flexibly match the needs of small and medium-sized mines, and support multiple joint operations to increase production capacity.
 

 

 

Product Parameters

 

Model	Motor Power(kw)	Dimension(mm)	Dimensions(mm)	Weight(t)	Production(t/day)	Feed size(mm)	Discharge size(mm)	Speed(r/min)	Gearbox
900*140	3KW	900*14*60*190+-20	2100*2100*1600	2.3	0.5-0.8(0.03-0.05t/h)	<=30	0.15-0.18	11-13	350
1100*180	5.5KW	1100*180*1100*250+-20	2600*2600*1900	4.5	3-5(0.54-0.8t/h)	<=30	0.15-0.18	11-13	400
1200*180	7.5KW	1200*180*1100*250+-20	2300*2300*1900	5	3-5(0.5-0.8t/h)	<=30	0.15-0.18	11-13	450
1200*200	7.5KW	1200*200*110*250+-20	2300*2300*1900	5.5	0.8-1t/h	<=30	0.15-0.18	11-13	450
1400*250	18.5KW	1400*250*170*350+-20	2700*2700*2100	8.5	15(1t/h)	<=30	0.15-0.18	18-22	500
1500*300	22KW	1500*300*180*400+-20	2750*2750*2300	11	20(1.2t/h)	<=30	0.15-0.18	18-22	650
1500*350	22KW	1500*350*180*400+-20	2750*2750*2300	12	1.5t/h	<=30	0.15-0.18	18-22	650
1600*350	30KW	1600*350*200*450+-20	2850*2850*2500	13	2t/h	<=30	0.15-0.18	18-22	750
1600*400	30KW	1600*400*200*500+-20	2850*2850*2500	15	2.5t/h	<=30	0.15-0.18	18-22	750

Note:
◊ The raw material should be put into the machine after the machine running normally.
◊ This machine is not allowed to state with the material in the machine. If the machine is stopped because of stoppage, the residual material in the machine should be cleared. Then start the machine again.
◊ The material should be put into the machine uniformity, not sometimes much sometimes less. It's better to use a feeding equipment.
◊ The bearing part should be add butter regularly.
◊ Every bolts should be checked to avoid flexible.
◊The bearing should be changed in time if it is damaged to avoid damage other parts.
◊ While the machine is running formally, you should check if there is abnormal sound in the reducer box and or bearing part, if there is a too high temperature, if there is too big motor current and so on. If it happened, you should stop the machine to remedy of the trouble.
◊ The motor V-belt should be removed while examine and repair the machine for your safe. 
Clinets Visit:

Exhibition Style:

At present, we have supported the company's comprehensive online communication, now stationed in the trading platform: Ali International Station, China Manufacturing Network, as well as our company has about the different regions of different languages were set up on the official website, the following for our company's different platforms URL, can be viewed as needed.Thank you for your support and I hope we can be great partners!

 

Q: How about the quality of STM products?
A: All of STM Machinery are under CE and ISO9001:2015 certification, which is manufactured strictly according to national and international standards, and we take a test on each equipment before delivery. You can also use Trade Assurance by Made in China for product quality protection, on-time shipment protection and payment protection.
Q: How about the STMl Machinery price?
A: We are manufactory, and we can give you lower price than those trade companies. Besides, customers from made in China can get a discount.
Q: Do you provide after-sale service?
A: Yes. The warranty period of our machines is one year, and we have a professional after-sale service team to promptly and thoroughly solve your problems.
Q: Do you provide equipment operation training and installation?
A: Yes. STM company could dispatch professional engineers to guide the equipment installation, adjustment, and operation training on worksite.
Q: Can you test our samples for stone crusher or grinding mill ?
A: Yes. You can send your samples to us for test and analysis.