High Quality Competitive Price 325X450X60mm Cross Roller Slewing Ring Rotary Table Bearing Factory Price
|
Still deciding? Get samples of $ !
Request Sample
|
Product Details
| Customization: | Available |
|---|---|
| Standard or Nonstandard: | Standard |
| Feature: | High Speed, Vacuum, Antimagnetic, Cold-Resistant, Corrosion-Resistant, Heat-Resistant |
Manufacturer/Factory & Trading Company
360° Virtual Tour
Diamond Member Since 2021
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Year of Establishment
2019-07-23
Number of Employees
23
Find Similar Products
Basic Info.
- Model NO.
- ZKLDF325
- Sealing Gland
- Sealed On Both Sides
- Rolling-Element Number
- Multiple-Column
- Roller Type
- Spherical Raceway
- Material
- Bearing Steel
- Type
- No Gear
- Weight
- 28kg
- Friction Moment of Bearing
- 11nm
- Limit Speed
- 1000r/Min
- Trademark
- STMPB
- Origin
- Luoyang, Henan, China
- HS Code
- 8482102000
- Production Capacity
- 1, 000, 000 Pieces/Year
Product Description
YRT Standard Series
Thrust-centripetal combined structure can simultaneously bear bidirectional axial load, radial load and
overturning moment. Introduction holes are evenly distributed on the bearing, which can be directly fixed to the
bearing with bolts; the bearing has been preloaded before leaving the factory, and there is no need to adjust the
clearance for installation; this series is suitable for low speed, short operating cycle, high rigidity and precision
requirements occasions, such as rotary table, indexing head, etc.
YRTS High Speed Series
The external structure and dimensions are the same as the YRT series, but the internal structure is different
from the YRT series, which determines that the speed limit of this series is higher than that of the YRT series, and
the friction torque is lower and uniform than that of the YRT series. For occasions, this series can be selected, such
as bearings for shafts driven by direct drive motors.
ZKLDF Thrust Angular Contact Ball Series
ZKLDF series thrust angular contact bearing can also bear combined load, but it has very high speed and
very low friction torque, and can ensure high rotation accuracy at the same time. It is very suitable for some
applications, such as high-speed rotary worktable, milling, grinding, honing head, precision measurement, testing
equipment and so on.
YRTM Integrated Angle Measuring System Turntable Bearing
The angle measurement system is integrated on the basis of the YRT standard bearing, which can realize the
accurate measurement of the angle, and the highest accuracy can reach 1 arc second, which is very suitable for
applications that have high requirements on the angle positioning accuracy.
Compared with ordinary bearings, YRT series bearings have higher precision, so noting it when installing and using them, otherwise the precision and service life of the bearings will be seriously affected.
The bearing should be handled with care, and the connecting bolts ensure the safety of the bearing during transportation. In order to make the bearing alignment easier, loosen the coupling bolts of the bearing itself before installation, and tighten or remove it after installation.
According to the given tightening torque MA, using a torque wrench to install, following the "cross method",
and tightening step by step (as shown in the following picture). while rotating the bearing.
1. The first stage: MAX40%;
2. The second stage: MAX70%;
3. The third stage: MAX100%;
The fixing process of the outer ring is the same as that of the inner ring.
Notice:
1. Grade 10.9 or higher for mounting bolts.
1. Grade 10.9 or higher for mounting bolts.
2. The installation force can only be applied to the bearing ring to be installed, and it is not allowed to bear the force through the rolling elements.
3. During installation and removal, bearing assemblies cannot be disassembled or interchanged.
4. If the bearing is extremely difficult to rotate, loosen the mounting bolts and re-tighten them in three steps in a criss-cross sequence. Eliminate bearing deformation.
5. Do not knock the bearing during installation.
28 professional mechanical engineers
16 professional bearing analysis engineers
326 professional workers
83 sets of high precision CNC machine tools
32 sets of bearing testing equipment
13,000 square meters factory
In the sales process, we will have professional sales personnel to answer customers' questions in time, update the production progress, sort out the photos and videos of packaging and delivery, provide customers with the required documents; We will also invite customers to visit our factory, and we will strive to provide solutions for customers' needs.
It is not the end after delivery, but a new beginning. We will update the logistics status and arrival date to customers in time.Ask customers for feedback on product quality, packaging, etc. at the first time, so as to improve the next cooperation. We will do our best to deal with any customer's problems with the product.
){kind=link}
Send your message to this supplier
People who viewed this also viewed
Find Similar Products By Category
- Supplier Homepage
- Products
- Mining machinery accessories
- YRT Turntable Bearing
- High Quality Competitive Price 325X450X60mm Cross Roller Slewing Ring Rotary Table Bearing Factory Price
Related Categories
Hot Searches
More